How to Fix a Column Not Running Automatically in Your Workflow

I have a column that isn't running unless i press play on each row individually. Here is a loom showing what happens. How do i fix this. https://www.loom.com/share/96df4ad981f4433aaffced1252596714?sid=d330c2ec-dcba-4f55-b3fe-c5cb9bc6b45e

10 comments

Channeled
APP
·
·
This issue is likely related to the Auto-update setting. To fix this:1. Look for the Auto-update icon at the bottom right of your table 2. Click it and select "Turn on Table" 3. Choose either "Continue without running" or "Update cells"This will ensure your table automatically runs all columns whenever rows are added or edited.Alternatively, if you want to run all pending rows at once without enabling auto-update, you can:1. Right-click the column 2. Click "Play" 3. Select "Run All Rows that haven't run or have errors" Sources: Run Options Configuring your table settings | Documentation | Clay University
hanad c.
·
·
it's on "turn on table" currently
hanad c.
·
·
Still aint working
Channeled
APP
·
·
There could be a few things to check:1. Make sure both the table AND column-level auto-update settings are enabled: • Check the table-level setting by clicking the Auto-update icon at the bottom right • Check the column-level setting by going to the column's "Run Settings" 2. Try toggling the auto-update setting: • Click the Auto-update icon at the bottom right • Select "Turn on Table" • Choose "Update cells" to refresh the current dataIf the issue persists after checking these settings, you may want to request human support to investigate further, as there could be other technical factors affecting the auto-update functionality. Sources: Guide: Ways to save Clay credits | Documentation | Clay University Configuring your table settings | Documentation | Clay University Auto-update and Auto-dedupe Table
Channeled
APP
·
·
Looks like you're still looking for help. We're escalating this over to our support team and someone should be in touch soon. In the meantime, feel free to include any other information that may be helpful in solving your issue!
Muhammad S.
·
·
You are trying to run rows that did not run or have errors However, in your current setup all the rows ran just fine but did not found any result that is why the rows are not rerunning Filter the lookup row column with "has no results" filter and then force run the whole column.
Anaum K.
·
·
Hello Hanad! Thank you for reaching out! Muhammad is correct—that’s a great way to solve your issue. If you share a link to the table, I’d be happy to guide you through the solution step by step. https://downloads.intercomcdn.com/i/o/1171717996/ac7729f84b426e1d0358af02/image.png?expires=1735671600&signature=06c83b60eeb26e8742e7096cbb88b1a3a26281d4cabf70000278c57f5aeb7bb7&req=dSEgF85%2FmohWX%2FMW1HO4zYTywS76AZYQ2BKsam%2FhVPsAQg%3D%3D%0A
Channeled
APP
·
·
Hey there - just wanted to check in here to see if you needed anything else! Feel free to reply back here if you do.
Channeled
APP
·
·
We haven't heard back from you in a bit, so we're going to go ahead and close things out here - feel free to let us know if you still need something!
Channeled
APP
·
·
Hi hanad c.! This thread was recently closed by our Support team. If you have a moment, please share your feedback: