Hi Clay S. Can you help me figure out why my "Write: Domain Is Active" and "Write: Domain Is InActive" have high rate of being stale? Here is the table for your reference. Thank you again for your help ❤️
Your "write to table" functions may be stale due to processing issues with large tables or complex workflows. To resolve this:
1. Try a hard refresh:
• Mac: Command (⌘) + Shift + R
• Windows: Ctrl + F5 or Ctrl + Shift + R
2. If the issue persists:
• Delete the affected columns
• Create fresh columns
• Re-map your data to the write-to-other table
• Ensure auto-dedup is activated in the destination table
These steps should help resolve the stale data issue.
Okay I just created a scheduled run for those columns, But what is the exact time it will trigger for running, in what timezone and what time? 🙂 thank you!
Hey Christopher! Apologies for the delay. Happy to help✨. I made a quick video walking through the stale data issue here: https://www.loom.com/share/c1c649f28c39468ca54cb23f87fa3e89Scheduled Run: Scheduled runs are triggered based on the interval from when they were first saved. The exact time depends on when you set up the schedule and should apply to your timezone.
I also made a quick video clarifying your configuration: https://www.loom.com/share/a4617deb5a8f4a1cb7097dee467e5204
Let me know if this helps!