Starting Find People Search from Custom Row in Clay Table | Clay

Starting Find People Search from Custom Row in Clay Table

Hello. I'm wondering if I can run a Find People search from my company list starting at row 30 or row 40 instead of row 1? I've already run the first 30 rows and don't want to rerun them. Where can I set the row number to start running an enrichment? Is this possible? here's the claytable link https://app.clay.com/workspaces/445394/tables/t_fGYZFfSPZBws/views/gv_JZjiCTGb53Zb Thx!

35 comments

Channeled
APP
·
·
Hi Adam G.! This thread was recently closed by our Support team. If you have a moment, please share your feedback:
Channeled
APP
·
·
Thanks! We've reopened this thread. You can continue to add more detail directly in this thread.
Adam G.
·
·
i did not see a reply before the thread was closed. Can you respond to the question please?
Adam G.
·
·
Stefano Are you able to answer my question above? Seems to have been skipped. Thank you.
Channeled
APP
·
·
Hi Adam G.! This thread was recently closed by our Support team. If you have a moment, please share your feedback:
Channeled
APP
·
·
Thanks! We've reopened this thread. You can continue to add more detail directly in this thread.
Channeled
APP
·
·
Thanks! We've reopened this thread. You can continue to add more detail directly in this thread.
Adam G.
·
·
Doesn't seem like Clay Team is working today. Can someone please reply to my question. Even the bot is taking the day off:)
Channeled
APP
·
·
Hi Adam G.! This thread was recently closed by our Support team. If you have a moment, please share your feedback:
Channeled
APP
·
·
Thank you so much for sharing your feedback Adam G.!
Channeled
APP
·
·
Thank you so much for sharing your feedback Adam G.!
Channeled
APP
·
·
Thank you so much for sharing your feedback Adam G.!
Channeled
APP
·
·
Thanks! We've reopened this thread. You can continue to add more detail directly in this thread.
Channeled
APP
·
·
Thanks! We've reopened this thread. You can continue to add more detail directly in this thread.
Adam G.
·
·
Anybody out there in clayniverse?
Channeled
APP
·
·
I apologize for the confusion earlier. Can you please confirm if you were able to find the "Choose Number of rows to run" option when right-clicking on the column in your Clay table?
Adam G.
·
·
Upon double clicking on the column i do not see the option "Choose Number of rows to run." The question is not only about choosing the number of rows to run, but choosing which rows to run so it doesn't start on row 1 again.
Channeled
APP
·
·
Hi Adam G.! This thread was recently closed by our Support team. If you have a moment, please share your feedback:
George D.
·
·
Hey there - we're having a bit of trouble with our support tooling and closed this conversation out preemptively. Reopening it here and someone from our team will get back to you soon!
Channeled
APP
·
·
Yes, you can run a Find People search starting from a specific row. Here's how to do it: 1. Right-click on the column 2. Hover over "Run Column" > "Choose Number of rows to run" 3. Specify both: • The number of rows you want to run • The starting row number (e.g., row 30 or 40)This way you can skip the rows you've already processed and continue from where you left off. Source: Run Options
Channeled
APP
·
·
You can run a Find People search starting from a specific row by following these steps: 1. Right-click on the column 2. Hover over "Run Column" > "Choose Number of rows to run" 3. Specify both: • The starting row number (e.g., row 30 or 40) • The number of rows you want to runThis allows you to skip the rows you've already processed and continue from where you left off. Source: Run Options
Channeled
APP
·
·
You can run a Find People search starting from a specific row by following these steps: 1. Right-click on the column 2. Hover over "Run Column" > "Choose Number of rows to run" 3. Specify: • The starting row number (e.g., row 30 or 40) • The number of rows you want to runThis allows you to skip the rows you've already processed and continue from where you left off. Source: Run Options
Channeled
APP
·
·
You can run a Find People search starting from a specific row by following these steps: 1. Right-click on the column 2. Hover over "Run Column" > "Choose Number of rows to run" 3. Specify: • The starting row number (e.g., row 30 or 40) • The number of rows you want to runThis allows you to skip the rows you've already processed and continue from where you left off. Source: Run Options
Channeled
APP
·
·
You can run a Find People search starting from a specific row by following these steps: 1. Right-click on the column 2. Hover over "Run Column" > "Choose Number of rows to run" 3. Specify: • The starting row number (e.g., row 30 or 40) • The number of rows you want to runThis allows you to skip the rows you've already processed and continue from where you left off. Source: Run Options
Anaum K.
·
·
Hello Adam! Thank you for reaching out! If you double click the header for the "Find People search" column, you should see the "Run column" option from the dropdown.
Adam G.
·
·
Anaum K. George D. thanks for your help. I don't see what is described above to select the row when hovering, i don't see "run column" to hover over. However, I got halfway there by hovering over the column #/# rows, header, can pick the starting row and how many after, but lost the preceding rows in the sheet.
Adam G.
·
·
what is the number generator for
Adam G.
·
·
?
Anaum K.
·
·
If you hover over the "Run column" option, you should see the option to “Choose Number of Rows to Run”. From here, you can set the number of rows to run and which row to start from. https://downloads.intercomcdn.com/i/o/w28k1kwz/1376165155/d6b99b8a131e12a55e1433e432a7/Screenshot+2025-02-11+at+5_31_28%E2%80%AFPM.png?expires=1739314800&signature=6cd0213576d0aa245769fa08acb1670a022bed63b14ffa28e33a4d4336199ab4&req=dSMgEMh4mIBaXPMW1HO4zVwv1fNGZ92OlhN0iXt3YUGQdZVBUIA5hvfNPci9%0A%2FMBi%0A
Adam G.
·
·
I see the option to start on x row and number of rows to run. Got it thx!!!
Adam G.
·
·
Close out the ticket!
1
Anaum K.
·
·
No problem! If you have any other questions, please don't hesitate to reach out. I'd be happy to help :)
Adam G.
·
·
Anaum K. Here's a question for you. I am working with Michael Surragia and he provided this link that gives me 3000 credits when create a clay account. https://clay.com/?via=7eb948 However, because I already have a clay account the link is not working for me. Can you assist in providing the 3000 credits in to my account linked to adam.goodman@kastle.com ?
Adam G.
·
·
Anaum K. Are you still with me here?
Anaum K.
·
·
Unfortunately, you’re only eligible to receive referral credits if you use a referral before signing up for an account. Because you already have an account, we won’t be able to honor that referral. Let us know if you have any other questions!