Webhook Issues: Troubleshooting Data Update Failures

·

For some reason this webhook is not sending updated data to the table anymore and Make says the scenario is working fine on their end. Any help here? https://app.clay.com/workspaces/523250/workbooks/wb_xFe2Sk62tDYD/tables/t_0svh7dzbCvActBTbphm/views/gv_0svh7dzdFtfBzhbFqYn

16 comments

· Sorted by Oldest

Andrew Lopez-Gallego
·
·
https://app.clay.com/workspaces/523250/workbooks/wb_xFe2Sk62tDYD/tables/t_0svh7dzbCvActBTbphm/views/gv_0svh7dzdFtfBzhbFqYn
Andrew Lopez-Gallego
·
·
That's not the correct email!
Andrew Lopez-Gallego
·
·
It's andrewlg@daylightcomputer.com
Andrew Lopez-Gallego
·
·
yes updated data. You can see the last catch was Aug 5th
Andrew Lopez-Gallego
·
·
ok sure and how do I send table data to that new one?
Amit Kallakuri
·
·
Sorry to clarify. Just begin with webhook as a source and retry the same exact action to start(set up the endpoint just as you did).
Loading attachments
Andrew Lopez-Gallego
·
·
Ok I did that and updated Make
Andrew Lopez-Gallego
·
·
actually now I do when I hit run once in Make
Andrew Lopez-Gallego
·
·
only 1 so far
Andrew Lopez-Gallego
·
·
not sure If I should change this?
Loading attachments
Andrew Lopez-Gallego
·
·
I also need to copy over the table data
Andrew Lopez-Gallego
·
·
Yes https://app.clay.com/workspaces/523250/workbooks/wb_xFe2Sk62tDYD/tables/t_0t2a89epb2schFu5Qaa/views/gv_0t2a89fY8wdj5gy8CnA
Andrew Lopez-Gallego
·
·
It's from tonight when I ran the "run once" button so will see if in another hour it runs more leads
Andrew Lopez-Gallego
·
·
it seems to yes. Can you tell me why rows 4-13 didn't capture the first columns' webhook though? Here's the table: https://app.clay.com/workspaces/523250/workbooks/wb_xFe2Sk62tDYD/tables/t_0t2a89epb2schFu5Qaa/views/gv_0t2a89fY8wdj5gy8CnA
Andrew Lopez-Gallego
·
·
Yes, I don't understand why it stopped either - maybe rate limits? The trigger event is when a person subscribes to our newsletter, Klaviyo then sends the data to Make and then to Clay via the webhook.